From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sat Mar 23 2002 - 06:45:22 GMT-3
I am not able to form a simple PVC across the 1010. here is the config
and diagram
r4--------ls1010--------r6
am i missing something or what.. as the pings are saying sending...
but no reply from the other end and the vp is not formed. but vc are UP
R4:
interface ATM0
ip address 192.168.1.1 255.255.255.0
pvc 0/5 qsaal
!
pvc 0/16 ilmi
!
pvc 1/100
protocol ip 192.168.1.2
broadcast
oam-pvc 0
encapsulation aal5snap
!
no atm ilmi-keepalive
R6:
interface ATM0/0
ip address 192.168.1.2 255.255.255.0
no atm ilmi-keepalive
pvc 0/5 qsaal
!
pvc 0/16 ilmi
!
pvc 1/200
protocol ip 192.168.1.1 broadcast
broadcast
oam-pvc 0
encapsulation aal5snap
LS1010:
interface ATM1/0/0
no ip address
no ip directed-broadcast
logging event subif-link-status
no atm ilmi-keepalive
!
interface ATM1/0/1
no ip address
no ip directed-broadcast
logging event subif-link-status
no atm ilmi-keepalive
atm pvc 1 200 interface ATM1/0/0 1 100
shows:
R4:
r4#sh atm vc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells
Sts
0 1 0 5 PVC SAAL UBR 155000
UP
0 2 0 16 PVC ILMI UBR 155000
UP
0 5 1 100 PVC SNAP UBR 155000
UP
r4#sh atm vp
Data CES Peak CES
Interface VPI VCs VCs Kbps Kbps Status
r4#
r4#sh atm map
Map list ATM0pvc5 : PERMANENT
ip 192.168.1.2 maps to VC 5, VPI 1, VCI 100, ATM0
, broadcast
R6:
r6#sh atm vc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells
Sts
0/0 1 0 5 PVC SAAL UBR 155000
UP
0/0 2 0 16 PVC ILMI UBR 155000
UP
0/0 4 1 200 PVC SNAP UBR 155000
UP
r6#sh atm vp
Data CES Peak CES
Interface VPI VCs VCs Kbps Kbps Status
r6#sh atm map
Map list ATM0/0pvc4 : PERMANENT
ip 192.168.1.1 maps to VC 4, VPI 1, VCI 200, ATM0/0
, broadcast
LS1010:
Switch#sh atm status
NUMBER OF INSTALLED CONNECTIONS: (P2P=Point to Point, P2MP=Point to
MultiPoint, MP2P=Multipoint to Point)
Type PVCs SoftPVCs SVCs TVCs PVPs SoftPVPs SVPs
Total
P2P 5 0 0 0 0 0 0
5
P2MP 0 0 0 0 0 0 0
0
MP2P 0 0 0 0 0 0 0
0
TOTAL INSTALLED CONNECTIONS =
5
PER-INTERFACE STATUS SUMMARY AT 01:04:51 UTC Sat Mar 23 2002:
Interface IF Admin Auto-Cfg ILMI Addr SSCOP
Hello
Name Status Status Status Reg State State
State
--------------- -------- ------------ -------- ------------ ---------
--------
ATM1/0/0 UP up waiting WaitDevType Idle
n/a
ATM1/0/1 UP up waiting WaitDevType Idle
n/a
ATM1/0/2 DOWN down waiting n/a Idle
n/a
ATM1/0/3 DOWN down waiting n/a Idle
n/a
ATM2/0/0 UP up n/a UpAndNormal Idle
n/a
Switch#sh atm vc
Interface VPI VCI Type X-Interface X-VPI X-VCI Encap Status
ATM1/0/0 0 5 PVC ATM2/0/0 0 39 QSAAL UP
ATM1/0/0 0 16 PVC ATM2/0/0 0 35 ILMI UP
ATM1/0/0 1 100 PVC ATM1/0/1 1 200 UP
ATM1/0/1 0 5 PVC ATM2/0/0 0 40 QSAAL UP
ATM1/0/1 0 16 PVC ATM2/0/0 0 36 ILMI UP
ATM1/0/1 1 200 PVC ATM1/0/0 1 100 UP
Switch#
Switch#sh atm vp
Interface VPI Type X-Interface X-VPI Status
Switch#
Pings:
R4:
r4#ping 192.168.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
18:30:28: IP: s=192.168.1.1 (local), d=192.168.1.2 (ATM0), len 100, sending.
18:30:30: IP: s=192.168.1.1 (local), d=192.168.1.2 (ATM0), len 100, sending.
18:30:32: IP: s=192.168.1.1 (local), d=192.168.1.2 (ATM0), len 100, sending.
18:30:34: IP: s=192.168.1.1 (local), d=192.168.1.2 (ATM0), len 100, sending.
18:30:36: IP: s=192.168.1.1 (local), d=192.168.1.2 (ATM0), len 100, sending.
Success rate is 0 percent (0/5)
r4#
R6:
r6#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
18:21:11: IP: s=192.168.1.2 (local), d=192.168.1.1 (ATM0/0), len 100,
sending.
18:21:13: IP: s=192.168.1.2 (local), d=192.168.1.1 (ATM0/0), len 100,
sending.
18:21:15: IP: s=192.168.1.2 (local), d=192.168.1.1 (ATM0/0), len 100,
sending.
18:21:17: IP: s=192.168.1.2 (local), d=192.168.1.1 (ATM0/0), len 100,
sending.
18:21:19: IP: s=192.168.1.2 (local), d=192.168.1.1 (ATM0/0), len 100,
sending.
Success rate is 0 percent (0/5)
r6#
-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:19 GMT-3