From: Ewing, James (james.ewing@xxxxxxxxx)
Date: Thu Mar 21 2002 - 09:28:55 GMT-3
You also need to add a metric command under OSPF. Any time you redistribute
a routing protocol into another protocol, you need to add a metric.
So try this.
r2#sr
router eigrp 1
redistribute ospf 1 metric 1000 100 255 1 1500
network 172.16.0.0
auto-summary
no eigrp log-neighbor-changes
!
router ospf 1
log-adjacency-changes
redistribute eigrp 1 metric 1 metric-type 1 subnets
redistribute igrp 10 metric 1 metric-type 1 subnets
network 172.16.3.0 0.0.0.255 area 0
!
router igrp 10
redistribute ospf 1 metric 1000 100 255 1 1500
network 172.16.0.0
!
James Ewing*
Senior Network Engineer- Network Architecture
One Digex Plaza
Beltsville, MD. 20705
* 240.264.2217 *443.677.6980 i<mailto:james.ewing@digex.com>
-----Original Message-----
From: Daniel Hong [mailto:Daniel.Hong@nec.com.au]
Sent: Thursday, March 21, 2002 6:51 AM
To: 'Shailen Amichand'; ccielab@groupstudy.com
Subject: RE: Three protocols redistribution
Tried that. didn't work.
any other suggestions
Daniel
-----Original Message-----
From: Shailen Amichand [mailto:Shailen.Amichand@xtra.co.nz]
Sent: Thursday, March 21, 2002 10:13 PM
To: Daniel Hong; ccielab@groupstudy.com
Subject: RE: Three protocols redistribution
Try to add redistribute redistribute ospf 1 metric 1000 100 255 1 1500
match external 1 external 2.
See what that does.
Any other ideas??
Shailen
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Daniel Hong
Sent: Thursday, 21 March 2002 22:15
To: ccielab@groupstudy.com
Subject: Three protocols redistribution
Hi Group
I have a router running three protocols, OSPF, IGRP1 and EIGRP 10. I
need to achieve any to any connectivity. When I do the redistribution,
Can I make one protocol become transit protocol, thus redistributing
between
igrp 1 <---> ospf <---> eigrp 10.
no direct redistribution between igrp and eigrp
I tried a number of ways to do this without much success. Can someone
tell me this is achievable or not.
lo0---R1---IGRP-----R2----EIGRP10-----R3--lo0
|
ospf
|
R3
|
|
lo0
Daniel
here is my config on r2
r2#sr
router eigrp 1
redistribute ospf 1 metric 1000 100 255 1 1500
network 172.16.0.0
auto-summary
no eigrp log-neighbor-changes
!
router ospf 1
log-adjacency-changes
redistribute eigrp 1 subnets
redistribute igrp 10 subnets
network 172.16.3.0 0.0.0.255 area 0
!
router igrp 10
redistribute ospf 1 metric 1000 100 255 1 1500
network 172.16.0.0
!
r2#o da
OSPF Router with ID (172.16.3.1) (Process ID 1)
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link
count
172.16.3.1 172.16.3.1 1621 0x80000004 0x4770 2
172.16.40.1 172.16.40.1 1661 0x80000003 0x338B 3
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
172.16.1.0 172.16.3.1 1308 0x80000002 0xA779 0
172.16.2.0 172.16.3.1 1308 0x80000002 0x9C83 0
172.16.10.0 172.16.3.1 27 0x80000001 0x46D2 0
172.16.30.0 172.16.3.1 1308 0x80000002 0x679C 0
r2#
r2#
r2#e to
IP-EIGRP Topology Table for AS(1)/ID(172.16.3.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 172.16.40.0/24, 1 successors, FD is 2585600
via Redistributed (2585600/0)
P 172.16.30.0/24, 1 successors, FD is 20640000
via 172.16.2.2 (20640000/128256), Serial1/3
P 172.16.1.0/24, 1 successors, FD is 20512000
via Connected, Serial1/2
P 172.16.2.0/24, 1 successors, FD is 20512000
via Connected, Serial1/3
P 172.16.3.0/24, 1 successors, FD is 2169856
via Connected, Serial0/1
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3