From: Sean C. (Upp_and_Upp@xxxxxxxxxxx)
Date: Thu Mar 21 2002 - 03:55:02 GMT-3
Hi Carl,
Sometimes I've had luck at finding what is bringing up the link by using the
undocumented command:
debug ip ospf monitor.
HTH,
Sean
----- Original Message -----
From: "Carl Phelan" <carlphelan@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 20, 2002 7:15 PM
Subject: ISDN - OSPF Demand Circuit
Hi All,
I have a bit of a problem, I have configured an OSPF demand circuit over
ISDN that just will not stop coming up even with the inclusion of the
command 'no peer neigbor-route'. The ISDN circuit is in OSPF area 0 as
are both attached routers.
I thought initially it may be IGRP being redistributed into OSPF causing
a change in its status but I have blocked incoming IGRP routes by
setting a 'passive interface' on the sending router with no luck. 'Show
dialer' reveals the reason for dialing as '255.255.255.255' - a
broadcast. The interfaces are both point to point in OSPF however and
not broadcast.
Thanks for your advice.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3