From: Shadi (ccie@xxxxxxxxxxxxxxxx)
Date: Wed Mar 20 2002 - 10:58:56 GMT-3
Hi all,
I have dialer watch scenario and it is not working with me, I have a network
leaned by ospf 130.3.145.0, when it disapears the dialer-watch should trigger
the Bri0, but it is not below you can find two of the interfaces
configuration.
(100.150.100.1/24)R3--------------ISDN------------R5s0---------------s0R4(e0)
(130.3.145.4/24)
R3
dialer watch-list 1 ip 130.3.145.0 255.255.255.0
int bri0
mac-address 0000.0000.00c3
ip address 130.3.135.3 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer callback-secure
dialer idle-timeout 90
dialer map ip 130.3.135.5 name WG3R5 class callback broadcast 5550111
dialer map ipx 135.0000.0000.00c5 name WG3R5 class callback broadcast
5550111
dialer watch-group 1
dialer-group 1
ipx network 135
no ipx route-cache
ipx watchdog-spoof
ipx spx-spoof
ipx spx-idle-time 20
isdn switch-type basic-net3
no cdp enable
ppp callback accept
ppp authentication chap
R5
dialer watch-list 1 ip 100.150.100.0 255.255.255.0
interface BRI0/0
mac-address 0000.0000.00c5
ip address 130.3.135.5 255.255.255.0
encapsulation ppp
dialer idle-timeout 90
dialer map ip 130.3.135.3 name WG3R3 broadcast 5550222
dialer map ipx 130.0000.0000.00c3 name WG3R3 broadcast 5550222
dialer watch-group 1
dialer-group 1
ipx network 135
no ipx route-cache
ipx watchdog-spoof
ipx spx-spoof
ipx spx-idle-time 20
isdn switch-type basic-net3
ppp callback request
ppp authentication chap
end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3