From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Thu Mar 21 2002 - 01:02:58 GMT-3
Are you running IGRP/RIp on this router ?? if so, then that could be the
reason ..
Nick
-----Original Message-----
From: Carl Phelan <carlphelan@hotmail.com>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Thursday, 21 March 2002 2:45
Subject: ISDN - OSPF Demand Circuit
>Hi All,
>
>I have a bit of a problem, I have configured an OSPF demand circuit over
>ISDN that just will not stop coming up even with the inclusion of the
>command 'no peer neigbor-route'. The ISDN circuit is in OSPF area 0 as
>are both attached routers.
>
>I thought initially it may be IGRP being redistributed into OSPF causing
>a change in its status but I have blocked incoming IGRP routes by
>setting a 'passive interface' on the sending router with no luck. 'Show
>dialer' reveals the reason for dialing as '255.255.255.255' - a
>broadcast. The interfaces are both point to point in OSPF however and
>not broadcast.
>
>Thanks for your advice.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3