From: Huy Luu (hluu@xxxxxxxxxxxx)
Date: Wed Mar 20 2002 - 12:32:02 GMT-3
Thanks Patrick,
Is it still possible to set the CIR on a DLCI on the router acting as a
frame-relay switch so the router can set the DE bit on excessive frames?
Can you provide an example?
"Patrick"
<pjm@roadrunne To: "Huy Luu" <hluu@veroxity.com>
r.nf.net> cc:
Subject: Re: apply traffic shaping
to router simulating FR switch
03/19/02 04:15
PM
I have used a router as a frame relay switch using a clear channel T1 and
it
works fine. The router does not have the ability to send BECN so I don't
think you can do FR traffic shaping!
----- Original Message -----
From: "Huy Luu" <hluu@veroxity.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 19, 2002 3:13 PM
Subject: apply traffic shaping to router simulating FR switch
> Friends,
>
> I need to test FrameRelay using live T1 circuits. I have a 7200 VXR with
a
> port adapter with 8 T1. I would like to use this as a FrameRelay switch
to
> connect several customers. I understand that traffic shapping papameters
> cold be done on true frame relay switches such as MGX or Cascade, but on
a
> router simulating as a frame-relay switch, can I apply CIR and such
> traffic shaping parameters to each of the DLCI that is switched by the
> router ? Does it work if I just create a map class with the desired
> traffic shaping parameters and apply it to each of the interfaces
> participating in FrameRelay switching on the router? Can I apply a
class
> to individual DLCI's under one physical interface?
>
> Thankyou all in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:14 GMT-3