From: Nigel Roy (nigel@xxxxxxxxxxxxxxxxx)
Date: Wed Mar 20 2002 - 06:47:29 GMT-3
Shadi,
You are basically correct, apart from the "ip" at the beginning of the
command. You can also adjust the timers, but it would also be good practice
to configure an access-list to control which PC's can connect to the remote
ethernet port. You also need to specifiy a metric when redistributing
mobile and the "subnets" keyword if going into OSPF.
If you want to be mobile between 2 ethernet connections on the same router
then you would need to enable bridging on both interfaces but you do not
need to rediostribute mobile.
regards
Nigel
----- Original Message -----
From: "Shadi" <ccie@investorsgrp.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Tuesday, March 19, 2002 5:30 PM
Subject: mobile arp?
> Guys,
>
>
> I would like to explain my unerstanding for configuring mobile arp,
>
>
>
> (Mobile PC)---------(e0)R1--------Clould----------------R2(e0)
>
> I want to enable mobilility for that PC, so I only do,
>
> R2
>
> int e0
> mobile arp
>
> router <igp>
>
> redistribute mobile
>
>
> Is that is all, or there is something more, I have seen the CCO saying
strange
> things and he always do router mobile.
>
> So is my configs correct?
>
> Shadi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:14 GMT-3