From: Ryaboy Vadim (VRyaboy@xxxxxxxxxx)
Date: Tue Mar 19 2002 - 03:41:24 GMT-3
I've found the problem. I did not have ip ospf priority 0 on 1 of the
routers. When I added yesterday loopback it changed OSPF DRs.
Please, ignore my previous post.
> -----Original Message-----
> From: Ryaboy Vadim
> Sent: Monday, March 18, 2002 9:09 PM
> To: 'ccielab@groupstudy.com'
> Subject: RIP v2 / OSPF redistribution
>
> Hello,
> I am doing Solie Skylab.
> I can not make RIP v2 / OSPF redistribution.
> Here is redistribution code on redistribution router (R2):
>
> router ospf 1
> redistribute eigrp 2020 subnets
> redistribute rip subnets
> network 140.100.1.0 0.0.0.255 area 0
> !
> router rip
> version 2
> redistribute ospf 1 metric 5
> network 192.128.128.0
>
> I have v2 staff on the Ethernet interfaces on R2 and R7 (below is R2
> example):
> interface Ethernet0
> ip address 192.128.128.2 255.255.255.0
> ip rip send version 2
> ip rip receive version 2
>
>
> R7 sees OSPF routes:
> 140.100.0.0/24 is subnetted, 1 subnets
> R 140.100.1.0 [120/5] via 192.128.128.2, 00:00:10, Ethernet0
>
> R1 (OSPF router) don't see RIP routes. RIP v2 is VLSM protocol. I have no
> auto-summary.
> I have subnets under router ospf redistribution.
> What else this redistribution needs? Is it something fundamental I am
> missing. Or do you guys think it is something else (mistyping somewhere ).
>
>
>
> I've looked into archives - seems some people had similar problems getting
> RIP v 2 routes into OSPF. But could not find any answer.
> Thank you for your help.
> Vadim.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:13 GMT-3