From: RSiddappa@xxxxxxxxxx
Date: Sun Mar 17 2002 - 20:44:14 GMT-3
This what I found is archives.
Check this out, destination UDP port 2067 when a DLSW has multiple
peers.....
Jan 11 16:07:49.804 UTC: IP: s=200.0.0.4 (Ethernet0), d=200.0.0.1, len 212,
rcvd 4
Jan 11 16:07:49.808 UTC: UDP src=0, dst=2067
Jan 11 16:07:49.812 UTC: IP: s=200.0.0.4 (Ethernet0), d=200.0.0.1, len 174,
rcvd 4
Jan 11 16:07:49.816 UTC: UDP src=0, dst=2067
Jan 11 16:07:52.024 UTC: IP: s=200.0.0.1 (local), d=200.0.0.5 (Ethernet0),
len 52, sending
-----Original Message-----
From: Nguyen, Thai [mailto:Thai.Nguyen@auspost.com.au]
Sent: Sunday, March 17, 2002 5:37 PM
To: Siddappa, Rajeev
Subject: RE: DLSW ports
Hi,
What about the port for VoIP?
Can you please advise what port 2067 is used for or where can I find info
for it?
Thanks
-----Original Message-----
From: RSiddappa@NECBNS.com [mailto:RSiddappa@NECBNS.com]
Sent: Sunday, March 17, 2002 11:55 AM
To: sandyccie@yahoo.com; ccielab@groupstudy.com
Subject: RE: DLSW ports
Here is the list.
. BGP uses TCP port 179
. RIPv1 uses UDP port 520
. OSPF uses protocol 89 and dest. address 224.0.0.5
. EIGRP uses protocol 88
. IGRP uses protocol 9
. DLSw uses TCP 2065 and 2067 and - if prioritization is used - TCP
1981,1982, 1982.
. ESP (IPSec) uses protocol 50
. AH (IPSec) uses protocol 51
. GRE uses protocol 47
. ISAKMP uses UDP port 500
R.
-----Original Message-----
From: Sandro Ciffali [mailto:sandyccie@yahoo.com]
Sent: Saturday, March 16, 2002 6:17 PM
To: ccielab@groupstudy.com
Subject: DLSW ports
It has been discussed lot of time but i need sanity
check.
DLSW uses port 2065 and 2067.
It uses port 1981, 1982, 1983 also if remote neighbor
priority is configured.
Can someone pls. confirm this for me...
Thanks
Sandeep
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:11 GMT-3