From: Wu, Sean (sean.wu@xxxxxxxxxxxxxx)
Date: Sun Mar 17 2002 - 17:54:06 GMT-3
Manny,
in OSPF, if you use multipoint as ospf network type, you will see /32, if
you change it to broadcast, then the /32 will be gone.
Ying, thanks, it works, I mixed it with access-list in route-map for
redistribution. If we use extended access-list in route-map, the source
address is for the routes, and the destination address is for mask.
Appreantly, it works differently in distribute-list.
Sean Wu
**************************************************************************
The information transmitted herewith is sensitive information intended only
for use by the individual or entity to which it is addressed. If the reader
of this message is not the intended recipient, you are hereby notified that
any review, retransmission, dissemination, distribution, copying or other
use of, or taking of any action in reliance upon this information is
strictly prohibited. If you have received this communication in error,
please contact the sender and delete the material from your computer.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:11 GMT-3