From: Jeff Kesemeyer (jkesemey@xxxxxxxxxxxxx)
Date: Sat Mar 16 2002 - 16:05:04 GMT-3
This has been the problem to most of the new books like the CCIE
Practice Kit as well, luckily the errata is out for this book.
Here is the link to it: (watch the wraps)
http://www.ciscopress.com/catalog/product.asp?product_id={9E5835BB-4972-
4956-B7F7-B4C8AE56C918}&selectDescTypeId={3E2086CC-D924-4834-9600-A29694
F5A455}&session_id={6A8D8D18-AD21-4B29-81C5-461BB1858DFE}&st=5A64A969-24
7A-47E1-8200-E6CA04EEDDA1
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Lupi, Guy
Sent: Saturday, March 16, 2002 1:25 PM
To: 'ccielab@groupstudy.com'
Subject: CCIE Practical Studies Volume 1
Has anyone else noticed a lot of errors in Solies lab solutions, or if
not errors then inconsitencies? For instance in Darth Reid, he says to
set up IGRP between r1 and r2, and to make sure that r2 sees the ospf
routes. When I looked at the solution, there was OSPF on r2 as well as
IGRP. Is he insinuating that unless you are told not to, you can add
routing protocols to your configs, because he never did say that you
cannot add OSPF to r2? Then there is his frame relay traffic shaping
example, which does not go along with CCO at all. I'm just wondering if
other people are seeing this also, thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:11 GMT-3