From: Mannan Venkatesan (mv_lab@xxxxxxxxxxx)
Date: Thu Mar 14 2002 - 11:44:27 GMT-3
Try area x range command on the ASBR which is also ABR (if not, you can
create a looback on ASBR and put it in different area). It would create a
summary address to null0 which will get into DV protocol.
I have seen it with 12.1 code.
Mannan
----- Original Message -----
From: <EdmondsSG@aol.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, March 14, 2002 5:34 AM
Subject: area 0 summarization - yes or no..
> I 'm abit confused by posts at groupstudy and what I've read in a number
of
> books..
>
> Q. can you use the area XX range xxx.xxx.xxx.xxx command to summarize
routes
> in area 0 ?
>
> some books - doyles tcp/ip vol1 /caslow say you can, but the recenet lab
> studies book says you can't !!
>
> I say that you can because i've used it in ios 12.1 and earlier to solve
the
> flsm to vlsm dilemma when redistributing between ospf and igrp. Maybe it
> does work but i'm missing some lurking issues that i'm not aware of yet.
Also
> an automatic summary is now created to null0 !! i'm sure it didn't do
that
> b4 either.....
>
> any thoughts ?
>
> Si
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:08 GMT-3