From: Tshon (tshon@xxxxxxxxxxx)
Date: Wed Mar 13 2002 - 18:46:43 GMT-3
This is for IOS 12.2. was this a implementation question for a
production network or for the CCIE lab. If for the lab this is not a
option.
George Hansen wrote:
>from CCO:
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp
_r/ind_r/1rfindp2.htm#xtocid27
>
>The traffic-share min command causes the Cisco IOS software to divide traffic
only among the routes with the best metric. Other routes will remain in the rou
ting table, but will receive no traffic. Configuring this command with the acro
ss-interfaces keyword allows you to configure multi-interface load splitting on
different interfaces with equal cost paths.
>
>
>
>Bhisham Bajaj wrote:
>
>>what does this command do in RIP
>>
>>traffic-share min across-interfaces
>>
>>
>>r1 --------------
>> -------------- R2
>>
>>r1 has two link to r2 one is 64 kbps and the other is
>>128 kbps
>>
>>does it have some thing to do with unequal cost load
>>balancing like eigrp or igrp
>>
>>where one link will get 33 % and the other get 66%
>>of the data
>>
>>BB
>>
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:03 GMT-3