From: Ian.C.Stong@xxxxxxxxxxxxxxx
Date: Wed Mar 13 2002 - 10:57:20 GMT-3
2 dialer map statements are ok to have. The reason for the second is in
case the first line is busy - the router will dial the second line.
Just a hunch but check your spid numbers versus the number you use in
your dialer map to make sure there is a proper relationship.
Let us know how it goes.
-----Original Message-----
From: tshon [mailto:tshon@netzero.net]
Sent: Wednesday, March 13, 2002 12:36 AM
To: Giveortake
Cc: sundar.palaniappan; ccielab
Subject: Re: ISDN pinging trouble
Why do you have to dialer map statements. all you need is one. This is
what's confusing your
problem. Take away one of them and it will work.
Giveortake@aol.com wrote:
>And the legendary configs
>
>R2#show run
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R2
>!
>enable secret 5 $1$qlE3$MWZ/p0uPBMKbyzV/PzwXZ1
>!
>username R5 password 0 cisco
>ip subnet-zero
>isdn switch-type basic-ni
>!
>!
>!
>!
>!
>interface Serial0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> no ip mroute-cache
> logging event subif-link-status
> logging event dlci-status-change
> shutdown
> no fair-queue
> no frame-relay inverse-arp
>!
>interface Serial0.1 point-to-point
> ip address 150.50.24.2 255.255.255.0
> no ip directed-broadcast
> frame-relay interface-dlci 104
>!
>interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface TokenRing0
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface BRI0
> ip address 192.168.1.1 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 900
> dialer map ip 192.168.1.2 name R5 broadcast 5418545
> dialer map ip 192.168.1.2 name R5 broadcast 5418546
> dialer load-threshold 1 outbound
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 61678903240101
> isdn spid2 61678903250101
> ppp authentication chap
>!
>ip classless
>!
>access-list 101 permit ip any any
>dialer-list 1 protocol ip list 101
>!
>!
>line con 0
> transport input none
>line aux 0
>line vty 0 4
> password alpha4
> login
>!
>end
>
>
>R5#show run
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R5
>!
>enable secret 5 $1$hm9M$BAvgca2AY6JPCW4jpDXd//
>!
>username R2 password 0 cisco
>ip subnet-zero
>!
>isdn switch-type basic-ni
>!
>!
>!
>interface Ethernet0
> ip address 10.10.10.1 255.255.255.0
> no ip directed-broadcast
>!
>interface Serial0
> no ip address
> no ip directed-broadcast
> no ip mroute-cache
> shutdown
>!
>interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface BRI0
> ip address 192.168.1.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 900
> dialer map ip 192.168.1.1 name R2 broadcast
> isdn switch-type basic-ni
> isdn spid1 61654185450101
> isdn spid2 61654185460101
> ppp authentication chap
>!
>no ip http server
>ip classless
>!
>dialer-list 1 protocol ip permit
>!
>line con 0
> transport input none
>line aux 0
>line vty 0 4
> password alpha4
> login
>!
>end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:03 GMT-3