From: Tshon (tshon@xxxxxxxxxxx)
Date: Wed Mar 13 2002 - 06:51:47 GMT-3
Are you doing direct encapsulation or Ip encapsulation? If Ip or FST
your will go in the Ip queue.
Stephen Oliver wrote:
> I have seen these port numbers referenced in connection with DLSW. I
> know 1981,1982 and 1983 are put in different queues if you use the
> priority keyword with dlsw peers. However when I create the
> access-list the only match listed with DLSW peers up is the line with
> 2065 in it.
>
> I suppose we really need to know what the other ports are used for to
> really understand what's needed.
>
> Stephen.
>
>
>> From: "Sean C." <Upp_and_Upp@hotmail.com>
>> Reply-To: "Sean C." <Upp_and_Upp@hotmail.com>
>> To: "Nicolai Gersbo Solling" <nicolai@cisco.com>, "CCIE Lab"
>> <ccielab@groupstudy.com>
>> Subject: Re: Custom Q list
>> Date: Tue, 12 Mar 2002 17:32:08 -0800
>>
>> Hi Nic,
>>
>> Hmmm..., I see how you're trying to grab dlsw first and put it into
>> queue 3.
>> I've never tried it that way.
>>
>> I 've used this config from a commercial lab for dlsw and queueing
>> and it
>> has worked:
>>
>> queue-list 1 protocol ip 1 list 101
>> queue-list 1 protocol ip 2
>> queue-list 1 protocol ipx 3
>> queue-list 1 queue 1 byte-count 2048
>> queue-list 1 queue 2 byte-count 1024
>> queue-list 1 queue 3 byte-count 1024
>>
>> acl 101 permit tcp any eq 2062 any
>> acl 101 permit tcp any any eq 2065
>> acl 101 permit tcp any any eq 2067
>> acl 101 permit tcp any any eq 1981
>> acl 101 permit tcp any any eq 1982
>> acl 101 permit tcp any any eq 1983
>>
>> HTH,
>> Sean
>>
>> ----- Original Message -----
>> From: "Nicolai Gersbo Solling" <nicolai@cisco.com>
>> To: "CCIE Lab" <ccielab@groupstudy.com>
>> Sent: Tuesday, March 12, 2002 9:51 AM
>> Subject: Custom Q list
>>
>>
>> Hi there!
>>
>> I have the followingf queue list configured:
>>
>> queue-list 1 protocol dlsw 3
>> queue-list 1 protocol ip 1
>> queue-list 1 protocol ipx 2
>> queue-list 1 queue 1 byte-count 1150
>> queue-list 1 queue 2 byte-count 2300
>> queue-list 1 queue 3 byte-count 2296
>>
>> this is apllied to my serial 0:1 interface - I see the IP and IPX
>> packets
>> beeing put in the right queue, but the DLSW queue never get's used!
>>
>> My DLSW configuration is working fine , henci I have some windows 95
>> machines broadcasting their netbios names on the network, which is
>> beeing
>> seen under DLSW reachability on the remote DLSW peer!
>>
>> Any ideas?
>>
>>
>> Nic
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:03 GMT-3