From: Ling Ling Liang (potatomato@xxxxxxxxxx)
Date: Wed Mar 13 2002 - 00:49:09 GMT-3
Hi, there,
Can you try to assign metric to the redistributed routes?
'redistribute connected metric 1500 100 255 1 1500'
Regards!
LL
----- Original Message -----
From: "Sundar Palaniappan" <sundar_palaniappan@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 12, 2002 9:54 PM
Subject: Redistribute connected Question
> There are two routers running EIGRP in a hub-and-spoke topology with a
> frame-relay connection between them.
>
>
> Here is the configuration:
>
> Router A:
>
> interface serial0.2
> ip address 192.168.10.1 255.255.255.252
>
> router eigrp 200
> network 192.168.10.0
> no auto-summary
>
>
> Router B:
>
> interface e0
> ip address 172.16.0.1 255.255.0.0
>
> interface serial0.1
> ip address 192.168.10.2 255.255.255.252
>
> router eigrp 200
> network 192.168.10.0 (serial0.1)
> redistribute connected
> no auto-summary
>
>
>
> EIGRP neighbor relationship is established. With this setup, I am thinking
I
> should be able to ping the ethernet interface of Router B but I can't.
>
> I checked the route table on Router A and I don't see a route to
172.16.0.0
> subnet.
>
> When I removed "redistribute connected" and put the network statement
> (172.16.0.0) under the EIGRP process on Router B and it WORKS.
>
> Just curious to know why "redistribute connected" doesn't work.
>
> Thanks,
> Sundar
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3