From: Carlos A. Silva (carlos@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 16:51:15 GMT-3
hello everyone:
i was just practicing dlsw/sap filters. we generated traffic using the dspu
commands. we created
2 hosts on each side of the dlsw connection, one with a 04 (lsap/dsap), one
with a F0 (lsap/dsap) . we tried filtering one of them but the ckt keeps
establishing.
here's my config on one side and some outputs.the other side is a mirror
config, without the lsap filter, or course...
any ideas?
dlsw local-peer peer-id 172.18.2.254
dlsw remote-peer 0 tcp 172.16.2.1 lsap-output-list 200
dlsw bridge-group 1
access-list 200 permit 0xF0F0 0x0101
access-list 200 deny 0x0000 0xFFFF
as far as i know, the F0 ckt should connect and the 04 shouldn't.
the ckt keeps establishing:
R1#sh dlsw cir
Index local addr(lsap) remote addr(dsap) state uptime
2130706474 0000.0000.0007(04) 0000.0000.0002(04) CONNECTED
00:00:12
3825205292 0000.0000.0007(AA) 0000.0000.0002(AA)
TABLISHED -
4278190123 0000.0000.0077(F0) 0000.0000.0022(F0) CONNECTED
00:00:12
3808428077 0000.0000.0077(AA) 0000.0000.0022(AA)
TABLISHED -
Total number of circuits connected: 2
R1#
btw, any one know why those AA ckts try to connect?
Carlos A. Silva [tel]: 5281.8401.2191
Micronet de Mixico http://mnet.com.mx
"...sal del camino, toma la ruta..." - Cerati
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3