From: MADMAN (dmadlan@xxxxxxxxx)
Date: Tue Mar 12 2002 - 21:02:09 GMT-3
Have you tried a debug dialer? Also I have seen problems with dialers
in the past, try a simple dialer string xxx.
Dave
Ramachandra Shenoy N wrote:
>
> Thanks for the response guys, I have tried with one dialer map line, I
> have set the threshold to 3, also tried setting the dialer threshold to
> 1 on both the routers, but still that darn thing is adamant and wont
> bring up the second line. The failures in the sh dialer command given
> below was I guess, due to the various combinations I was trying on the
> router, I connect each time I ping the other side invariably. Attached
> are the outputs for references.
>
> Thanks and Warm Regards
> Ramachandra Shenoy N
>
> Sh isdn status:
> Global ISDN Switchtype = basic-ni
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-ni
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 64, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI 65, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 1, tid = 1
> TEI 64, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent, spid2 valid
> Endpoint ID Info: epsf = 0, usid = 1, tid = 1
> Layer 3 Status:
> 1 Active Layer 3 Call(s)
> CCB:callid=81C5, sapi=0, ces=1, B-chan=1, calltype=DATA
> Active dsl 0 CCBs = 1
> The Free Channel Mask: 0x80000002
> Total Allocated ISDN CCBs = 1
>
> sh dialer
>
> BRI0 - dialer type = ISDN
>
> Dial String Successes Failures Last DNIS Last status
> 3847201 44 279 00:00:00 failed
> 0 incoming call(s) have been screened.
> 0 incoming call(s) rejected for callback.
>
> BRI0:1 - dialer type = ISDN
> Idle timer (60 secs), Fast idle timer (20 secs)
> Wait for carrier (2 secs), Re-enable (15 secs)
> Dialer state is multilink member
> Dial reason: ip (s=150.100.5.1, d=150.100.15.33)
> Connected to 3847201 (r2)
>
> BRI0:2 - dialer type = ISDN
> Idle timer (60 secs), Fast idle timer (20 secs)
> Wait for carrier (2 secs), Re-enable (15 secs)
> Dialer state is idle
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3