From: Tshon (tshon@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 17:43:46 GMT-3
couple of things to check make sure the image you are using is correct
for this system,
then make sure that the replaceable module is supported by the image you
are using,
after that check the confreg and see what's going on.
Lab Candidate wrote:
>There's 3 routers that got stuck in boot up giving the following msgs:
>
>00:00:05: %PA-2-UNDEFPA: Undefined Port Adaptor type 101 in bay 1
>00:00:07: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
>00:00:07: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
>00:00:07: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
>00:00:07: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up
>00:00:07: %SYS-5-CONFIG_I: Configured from memory by console
>00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, cha
ng
>ed state to up
>00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, cha
ng
>ed state to down
>00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed s
ta
>te to down
>00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed s
ta
>te to down
>00:00:09: %LINK-5-CHANGED: Interface Serial0/0, changed state to administrativ
el
>y down
>00:00:09: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to adminis
tr
>atively down
>00:00:09: %LINK-5-CHANGED: Interface Serial0/1, changed state to administrativ
el
>y down
>00:00:10: %SYS-5-RESTART: System restarted --
>Cisco Internetwork Operating System Software
>IOS (tm) C2600 Software (C2600-I-M), Version 12.2(5), RELEASE SOFTWARE (fc1)
>Copyright (c) 1986-2001 by cisco Systems, Inc.
>Compiled Tue 11-Sep-01 22:18 by pwade
>00:00:10: %SNMP-5-COLDSTART: SNMP agent on host r4 is undergoing a cold start
>
>After this, it just hang and won't respond to any key strokes, what problems a
m I having?
>Thanks!
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3