From: Ramachandra Shenoy N (rshenoy@xxxxxxxxxx)
Date: Tue Mar 12 2002 - 15:49:15 GMT-3
Hi,
Was trying to get ISDN Multilink PPP working, the configurations looks
good on both the routers, however the second link never comes up, I
tried verifying with extensive pings. The version I am using is
12.1.(5)T12, the configs are posted below, any inputs will be of great
help. I was able to get this working with IOS ver 11.3, does anyone
know of problems with 12.1.(5)T12 ?
*******R1********
interface Serial1.1 multipoint
backup delay 1 60
backup interface BRI0
ip address 150.100.4.3 255.255.255.0
frame-relay map ip 150.100.4.5 104 broadcast
interface BRI0
ip address 150.100.3.6 255.255.255.252
encapsulation ppp
ip ospf cost 9999
ip ospf demand-circuit
dialer idle-timeout 60
dialer map ip 150.100.3.5 name r2 broadcast 3847201
dialer map ip 150.100.3.5 name r2 broadcast 3847202
dialer load-threshold 1 outbound
dialer-group 1
isdn switch-type basic-ni
isdn spid1 38470010101
isdn spid2 38470020101
no peer neighbor-route
ppp authentication chap
ppp multilink
******R2*******
interface BRI0
ip address 150.100.3.5 255.255.255.252
encapsulation ppp
ip ospf cost 9999
ip ospf demand-circuit
dialer idle-timeout 60
dialer map ip 150.100.3.6 name r1 broadcast 3847001
dialer map ip 150.100.3.6 name r1 broadcast 3847002
dialer load-threshold 1 either
isdn switch-type basic-ni
isdn spid1 38472010101
isdn spid2 38472020101
dialer group 1
no peer neighbor-route
ppp authentication chap
ppp multilink
Thanks in advance
Ramachandra Shenoy N
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3