From: RSiddappa@xxxxxxxxxx
Date: Tue Mar 12 2002 - 15:30:19 GMT-3
|--------------------------R2
|
R1-----------Fr Multipoint---------------
| |
|
E0 |---------------------------R3
|
|
R4
I have this strange BGP problem.
R1 is the RR and R3 and R4 are clients. in AS - 10.
R2 is in AS 12.
I am trying to make EBGP connection between R2 and R3. They can ping
each other and I have used the Ip address on their serail interface for
neighbor command.
But they are not able to for adjacencies.
It is comming in to Active mode and stoping there ( I did a debug IP BGP
events). Is it some thin to do with IP address from whihc the TCP connection
is getting
established.
My understnding is the TCP connection will be established from the IP
address specied in the neighbor command ot it will be from the router ID.
Thnak you,
R.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3