From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Tue Mar 12 2002 - 11:15:56 GMT-3
Perhaps you might want to do a show ipx eigrp neighbors at the other end? ;)
>>> "Kenny Wong" <kenw@singmail.com> 03/09/02 10:42PM >>>
Hi Group,
>From Cisco CD,
ipx hello-interval eigrp
To configure the interval between IPX enhanced IGRP hello packets, use the ipx
hello-interval eigrp interface configuration command. To restore the default
interval, use the no form of this command.
Usage Guidelines
If the current value for the hold time is less than two times the interval
between hello packets, the hold time will be reset.
How to verify the hold time ? I try show ipx eigrp nei but the hold time still
remains at the default 15 sec even though i change the hello to be more than 2
times the default hold time.
The hold time never reset ?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:01 GMT-3