From: Bhisham Bajaj (bhishambajaj@xxxxxxxxx)
Date: Mon Mar 11 2002 - 12:09:39 GMT-3
mannan
thank u
i got the point and by now know how wrong i was in
understanding redistribution
thank u
Reg
bajaj
--- Mannan Venkatesan <mv70@lucent.com> wrote:
> Bajaj,
> Yigit is correct. "out" option works differently
> when you use it with a RP.
> If you use it with interface, it will filter the
> routes sending out of that
> interface.
>
> It you use it with RP, it will filter the routes
> from the RP being
> redistributed.
>
> HTHs,
> Mannan
>
>
> ----- Original Message -----
> From: "A Yigit Zorlu" <alec_cisco@yahoo.com>
> To: "'Bhisham Bajaj'" <bhishambajaj@yahoo.com>;
> "'Mannan Venkatesan'"
> <mv_lab@hotmail.com>; "'lab'"
> <ccielab@groupstudy.com>
> Sent: Monday, March 11, 2002 1:48 AM
> Subject: RE: distribute-list
>
>
> > Hi,
> >
> > If you would using distribute-list 1 out serial 0
> you were correct. But in
> > this case it filters routes coming out of EIGRP
> into OSPF. Same for
> > connected. Same for IPX as well
> >
> > ipx nlsp
> > redistribute eigrp 1
> > distribute-list 7 out eigrp 1
> > from EIGRP into NLSP.
> >
> > Thanks,
> >
> > Yigit
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> > Bhisham Bajaj
> > Sent: Monday, March 11, 2002 6:32 AM
> > To: Mannan Venkatesan; lab
> > Subject: Re: distribute-list
> >
> >
> > Mannan
> > i am trying to use a distribution list with the
> out
> > key word
> > i thought that if i was using it with the in key
> word
> > then it would filter incomming routes that i get
> into
> > the ospf process by the redistribute command &
> also as
> > ospf is a link state protocol we will have the
> route
> > in the datbase but not in the routing table
> >
> > but i am try to use the distribution list out so
> it
> > should filer routes that are going out of the ospf
> > process to other routing process
> >
> > Bajaj
> > --- Mannan Venkatesan <mv_lab@hotmail.com> wrote:
> > > Nope. The other way around.
> > >
> > > First statement is to filter routes from eigrp 1
> to
> > > ospf based on acl 1.
> > >
> > > Second is to filter routes from connected to
> ospf
> > > based on acl 1.
> > >
> > > Mannan
> > >
> > > ----- Original Message -----
> > > From: "Bhisham Bajaj" <bhishambajaj@yahoo.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Sunday, March 10, 2002 9:42 PM
> > > Subject: distribute-list
> > >
> > >
> > > > router ospf 1
> > > > distribute-list 1 out eigrp 1
> > > >
> > > > this will fliter routes baed on access-list 1
> when
> > >
> > > > redistributing ospf routes into eigrp 1
> > > >
> > > > but what does this command do
> > > >
> > > >
> > > > router ospf 1
> > > > distribute-list 1 out connected
> > > >
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3