From: A Yigit Zorlu (alec_cisco@xxxxxxxxx)
Date: Mon Mar 11 2002 - 07:10:49 GMT-3
Please find the information below about type 131 and 137 set packets in the
options field.
it's very recommended to CCIEs and wannabe's
http://www.ietf.org/rfc/rfc0791.txt
Yigit
-----Original Message-----
From: Shadi [mailto:ccie@investorsgrp.com]
Sent: Monday, March 11, 2002 12:08 PM
To: A Yigit Zorlu
Cc: ccielab
Subject: Re: block packets with type 131/137 in IP option field???
What does this command do?
I didn't understand the question and the answer :-)
so any comments?
----- Original Message -----
From: "A Yigit Zorlu" <alec_cisco@yahoo.com>
To: "'Tim Szigeti'" <szigeti@cisco.com>; <ccielab@groupstudy.com>
Sent: Monday, February 25, 2002 4:54 AM
Subject: RE: block packets with type 131/137 in IP option field???
> No ip source-route
>
> This command will solve your problem.
>
> Yigit
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Tim
> Szigeti
> Sent: Saturday, February 23, 2002 9:00 PM
> To: ccielab@groupstudy.com
> Subject: block packets with type 131/137 in IP option field???
>
>
> hi all,
>
> here's another one that completely stumped me (not that that's
> surprisingly difficult to do):
>
> Global Knowledge - ACPC 2 - Prep Lab 1 - 2.1a
>
>
> 2.1a) Do not allow packets through R5 and R3 with type 131 or type 137
> set in the options field of the IP packets
>
>
>
> (at first i misunderstood this to mean IP protocols 131 and 137, but
> that's not what's being asked)
>
> any suggestions are appreciated. also any thoughts on how the solution
> could be tested/validated.
>
> thanks in advance,
>
> -tim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3