From: JOSE ANGEL MARTINEZ DE LA VARA (jamartinez@xxxxxxxxxxxxxxxx)
Date: Mon Mar 11 2002 - 06:02:44 GMT-3
Hi,
Could you please send us your client router configuration? I couldn't make
it work as a IRDP client although the ICMP messages were received but not
processed. I tried both 'ip irdp' enabled and disabled in the client
interface and none work. I had disabled proxy-arp since IRDP is supposed to
provide a default router.
My copnfig in rhe IRDP "server" is:
interface fastethernet 0/0
ip irdp
ip irdp maxadvertinterval 10
ip irdp preference 50
And in the client router
interface ethernet 0
ip irdp
I tried both ip routing disabled with ip host-routing enabled and ip routing
enabled alone but none worked.
Any suggestion?
Thanks
Jose Angel
-----Mensaje original-----
De: Sandro Ciffali [mailto:sandyccie@yahoo.com]
Enviado el: viernes, 08 de marzo de 2002 01:09
Para: Richard Wheat
Cc: ccielab@groupstudy.com
Asunto: Re: IRDP
I used router as a host and it definatly showed me the
result i said before, However i did not test with a pc
client, I don't see any difference in the pc behaviour
but i will test, Unless microsoft implements tcp/ip in
a different way ;-), I will definatly try a host pc
doing the same thing to confirm, thanks for the
update.
Sandro
--- Richard Wheat <rwheat@ami.com.au> wrote:
> Sandro,
>
> I believe your testing maybe fundamentally flawed
> :-(
>
> After duplicating your setup I could not get a
> router to act
> successfully as a IRDP client. So I connected up a
> Windows 2000 machine
> and configured it to use IRDP. The machine
> installed default routes to
> both my test IRDP routers, but preferred the one
> with the higher
> preference setting and installed this as the default
> gateway. Changing
> the preference setting made the host install
> whichever router advertised
> the higher preference value. Windows seems to use
> "1001 minus the
> advertised preference" to set the metric for the
> installed routes.
>
> HTH,
> Richard.
>
> Sandro Ciffali wrote:
>
> > I have a question about irdp,
> >
> > Even though the doc says higher preference is
> prefered
> > to be the default g/w, In realitiy it is opposite.
> >
> > I am testing this with 12.1.9 routers running the
> > irdp, The client chooses the least ip irdp
> preference
> > default g/w. No it is not route-cache, i have
> disabled
> > it. I am clearing arp everytime. I can clearly see
> the
> > g/w being changed towards the least priority.
> >
> > All I am asking is what should be done in the lab
> if
> > asked to do it? Follow the reality or do it
> according
> > to the doc.??
> >
> > Can some one pls. advice.
> >
> > Thanks in advance
> >
> > Sandro
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3