From: Erhan Kurt (iekurt@xxxxxxxxx)
Date: Mon Mar 11 2002 - 05:41:05 GMT-3
Hi Shadi,
This trick works well. I did :) But read all the
statements in the lab questions, you MAY NOT be used
any address other than specified.
Erhan
--- Shadi <ccie@investorsgrp.com> wrote:
> I don't think secondary interfaces will affect
> redistribution, IGRP will
> never accept no classfull addresses to be
> redistributed inside it, only the
> routing updates can get effected.
>
> Please correct me if am wrong.
>
>
>
> ----- Original Message -----
> From: "A Yigit Zorlu" <alec_cisco@yahoo.com>
> To: "'C. Warren'" <chwarren@cox.net>;
> <ccielab@groupstudy.com>
> Sent: Sunday, March 10, 2002 10:19 PM
> Subject: RE: Easy redistribution
>
>
> > you can give secondary ip address to the serial
> interface between them
> with
> > the mask /27. Then it will pass that route to the
> neighbor.
> >
> >
> > Yigit
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of C.
> > Warren
> > Sent: Sunday, March 10, 2002 4:41 AM
> > To: ccielab@groupstudy.com
> > Subject: FW: Easy redistribution
> >
> >
> > You could make a static to null, then redistribute
> static into igrp.
> >
> > ip route 155.100.34.0 255.255.255.0 null 0
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On
> > > Behalf Of Zakir A
> > > Sent: Saturday, March 09, 2002 7:46 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Easy redistribution
> > >
> > >
> > > I have 2 routers running IGRP between them on
> network
> > > 155.100.1.0 /24 ?Is there any way of
> redistributing router
> > > A's /27 interface (which is running OSPF on
> frame cloud) into
> > > IGRP? I understand different methods such as
> summary-address
> > > and range commands, but these will only work for
> networks not
> > > connected to router A (at least that is what I
> am seeing).
> > >
> > >
> > > Router A
> > >
> > > Interface serial 1
> > > Ip add 155.100.34.1 255.255.255.224
> > >
> > > Interface serial 2
> > > Ip add 155.100.1.1 255.255.255.0
> > >
> > >
> > > Router B
> > >
> > > Interface serial 0
> > > Ip add 155.100.1.2 255.255.255.0
> > >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3