From: Erhan Kurt (iekurt@xxxxxxxxx)
Date: Mon Mar 11 2002 - 04:57:08 GMT-3
Hi Rajeev,
Did you use summary-address or area range ?
Erhan
--- RSiddappa@NECBNS.com wrote:
> I did the redistibute connected under OSPF and
> then use the summary address command under the OSPF
> to summrize the routes
> to /24.
>
> then it will appeer in IGRP after redistributing
> OSPF in to it.
>
> R.
>
>
>
>
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: A Yigit Zorlu [mailto:alec_c
>
> I did isco@yahoo.com]
> Sent: Monday, March 11, 2002 12:58 AM
> To: 'H C'; ccielab@groupstudy.com
> Subject: RE: OSPF and Loop back.
>
>
> Rajeev,
>
> the answer is maybe late but true. What was your
> method to make the loopback
> to be seen in IGRP ? we would like to hear it ? for
> CCIE success, we have to
> know different methods to solve the same problem.
>
> Regards,
>
> Yigit
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of H
> C
> Sent: Monday, March 11, 2002 7:32 AM
> To: ccielab@groupstudy.com
> Subject: RE: OSPF and Loop back.
>
>
> Hi all,
>
> I guess I'm a little slow on this one. Could
> someone please elaborate what
>
> "ip ospf network point-to-point"
>
> will do and why is loopback used for redistributing
> IGRP into OSPN?
>
> Thanks much!!!
>
> Henry
>
>
> From: RSiddappa@NECBNS.com
> Reply-To: RSiddappa@NECBNS.com
> To: mamoor@ieee.org, ccielab@groupstudy.com
> Subject: RE: OSPF and Loop back.
> Date: Mon, 11 Mar 2002 03:08:28 -0200
>
> I am looking at the llop back interface as a
> external network for OSPF.
>
> I think I got it working. I do not remeber why it
> started working.
> ( U r answer was little late)
>
> R.
>
>
>
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Sunday, March 10, 2002 8:53 PM
> To: Siddappa, Rajeev; ccielab@groupstudy.com
> Subject: Re: OSPF and Loop back.
>
>
> loopback interface is considered as stub network and
> is shown as /32 and
> igrp dont understand host routes
> so u need to over come process.
> give a command on loppback "ip ospf network
> point-to-point"
>
>
> -Mamoor
>
>
> ----- Original Message -----
> From: <RSiddappa@NECBNS.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, March 09, 2002 6:06 PM
> Subject: OSPF and Loop back.
>
>
> > Hi
> >
> > some one help.
> >
> > I am trying to do a OSPF and IGRP stuff. here is
> the set up
> >
> >
> >
> >
> >
> >
>
r1--------------------------r2----------------------------------------r3
> >
> > R1 in area 0 and ( OSPF)
> >
> > r1 and r2 in area 1 (/28) (OSPF)
> >
> > r2 and r3 runngin IGRP (/24)
> >
> > I am trying to make it work using the Loop back
> interafce command on R2.
> >
> > I ahve created a loop back interafce on r2 with
> maskl of / 28 and
> > reditributed connetd in to OSPF ( ihave used the
> route map to mathc the
> loop
> > back interface)
> >
> > But I am not able to redistribute it properly I
> guess, thats the reason,
> I
> > am not able to summrize it to / 24 address in the
> OSPF>
> >
> >
> > any hinst pls.
> >
> > R.
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3