RE: hello interval - wrong

From: RSiddappa@xxxxxxxxxx
Date: Sun Mar 10 2002 - 20:05:13 GMT-3


   
Usage Guidelines

If the current value for the hold time is less than two times the interval
between hello packets, the hold time will be reset to three times the hello
interval.

R.

-----Original Message-----
From: Kenny Wong [mailto:kenw@singmail.com]
Sent: Saturday, March 09, 2002 10:42 PM
To: ccielab@groupstudy.com
Subject: hello interval

Hi Group,
>From Cisco CD,

ipx hello-interval eigrp
To configure the interval between IPX enhanced IGRP hello packets, use the
ipx
hello-interval eigrp interface configuration command. To restore the default
interval, use the no form of this command.

Usage Guidelines
If the current value for the hold time is less than two times the interval
between hello packets, the hold time will be reset.

How to verify the hold time ? I try show ipx eigrp nei but the hold time
still
remains at the default 15 sec even though i change the hello to be more than
2
times the default hold time.
The hold time never reset ?



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:59 GMT-3