From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Sun Mar 10 2002 - 15:39:07 GMT-3
Best thing to do to be 200% sure is to :
router#show ip interfaces
This will always tell you what they are in. Why try to make sense out of
the rules when the router will tell you? If you have it off, and you
understand what you are doing, turn it on. The reverse is, if you have
it on and you want to turn it off, do so if you know what you are doing.
I could never remember the whole gamut of
on/off/multi/logical/point/etc.etc.
;-))
Manny
Rthugo1@aol.com wrote:
>
> Isianto,
> Here you go:
> Split Horizon Rules of Thumb
> By default......Full Mesh / Physical Interfaces......split horizon disabled
> Point-to Point / Physical Int...........split horizon
> enabled
> Multipoint / Logical Int...................split horizon
> enabled
> Point-to-Point / Logical Int.............split horizon
> disabled
> Full Mesh / Logical Interfaces........split horizon
> disabled
> Full Mesh / Logical & Physical Int..split horizon
> disabled
> Partial Mesh / Physical Int.............split horizon
> disabled
> Partial Mesh / Logical Int...............split horizon
> enabled
> Partial Mesh / Logical & Phy Int.....split horizon
> enabled
> *I am 99% sure of the acuracy of these, although there are a few redundant
> statements for the purposes of clarity.
> HTH,
> Rob H..........NP, DP, blah,blah,blah.............
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:59 GMT-3