From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Sun Mar 10 2002 - 00:07:08 GMT-3
Hmmmm nope, works for me. But, it depends highly on your configs... ;-))
If you use HDLC on a BRI, you may have trouble unless you have complete
dialer maps to the other side and viceversa. However, since this is a
point to point interface, you do not need to map your own IP... it
should just work.
With PPP it is a no brainer... with or without chap and you only need
one B channel. You can ping yourself and the other side. If only one end
is setup for dialing, then you need to initiate the CALL first on that
router. Once the call is setup, you can ping away both remote and local
address from either side.
But, again, your configs are very important. Post them for a better
look.
PPP is very IOS sensitive. Sometimes it likes just the right IOS if you
are sure 100% possitive your configs are correct.
Regards,
Manny
Babacar Diop wrote:
>
> Anyone has seen this problem?
>
> I can learn routes from my BRI interface but cannot
> ping it. Both BRIs are up (one side has called the
> other) ad i can learn routes on both but cannot ping
> either interface.
>
> BD
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:58 GMT-3