From: Bob Sinclair (bsin@xxxxxxxxx)
Date: Fri Mar 08 2002 - 21:13:31 GMT-3
Yes. I am running NetBEUI. The two other PCs can netview just fine. When I s
witch the PCs to different routers, it pretty much seems clear that the problem
is with the router, not the PCs. Relevant portions of he config below:
!
source-bridge ring-group 100
dlsw local-peer peer-id 148.6.6.6
dlsw remote-peer 0 tcp 148.6.3.3 lf 1500
dlsw remote-peer 0 tcp 148.6.4.4 lf 1500
!
!interface TokenRing1/0
mtu 4464
no ip address
ring-speed 16
source-bridge 2 1 100
source-bridge spanning
!
R6#sh dlsw peers
Peers: state pkts_rx pkts_tx type drops ckts TCP uptim
e
TCP 148.6.3.3 CONNECT 560 477 conf 0 0 0 03:17:5
8
TCP 148.6.4.4 CONNECT 499 492 conf 0 0 0 03:17:4
7
Total number of connected peers: 2
Total number of connections: 2
R6#
The only thing different about this router I can see is that it is a 3620. Hav
e had DLSW running fine on it before. Have tried various mtu settings. Reboot
ed it.
----- Original Message -----
From: "John Mistichelli" <jmistichelli@yahoo.com>
To: "Bob Sinclair" <bsin@erols.com>; <ccielab@groupstudy.com>
Sent: Friday, March 08, 2002 7:06 PM
Subject: RE: DLSW Troubleshooting
> Just a REAL basic question for you...
>
> Are you running NetBEUI on these PCs?
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Bob Sinclair
> Sent: Friday, March 08, 2002 6:22 PM
> To: ccielab@groupstudy.com
> Subject: DLSW Troubleshooting
>
>
> DLSW Experts:
>
> I have three routers, fully meshed with tcp remote peer statements. All are
> showing two connected peers. DLSW capabilities shows all three are aware of
> the PC's behind the other routers, and the local pc. Yet, the PC behind R6,
> on a token ring segment, cannot reach others or be reached. Even though the
> other peers know it is there (reachability). Have switched PC's so I know
> that is not the issue. There are no filters. Below are output of debugs.
> Testing is by net view \\ on the pc's. Whenever the PC behind R6 tries to
> contact another, it gets "network path not found". Same when others try to
> reach it. Other two peers can reach each other fine. Bottom line, other
> peers see it as reachable, but can't contact it.
>
>
> Below is debug when another peer tries to reach this one. 148.6.4.4 is the
> peer address of the peer trying to reach this one.
>
> R6#
> R6#
> 02:17:21: %DLSWC-3-RECVSSP: SSP OP = 18( NBNQ ) -explorer from peer
> 148.6.4.4(2065)
> R6#
> 02:17:21: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:21: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> R6#
> 02:17:23: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:23: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:24: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:24: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> R6#
> 02:17:24: %DLSWC-3-RECVSSP: SSP OP = 18( NBNQ ) -explorer from peer
> 148.6.4.4(2065)
> R6#
> 02:17:25: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:25: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:26: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:26: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> R6#
> 02:17:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:17:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
>
>
>
>
> Below is debug when this one tries to reach another. 148.6.3.3 is the peer
> router of the pc name I am trying to reach.
>
>
> R6#
> R6#
> 02:18:27: DLSW Received-ctlQ : CLSI Msg : UDATA_STN.Ind dlen: 84
> 02:18:27: %DLSWC-3-RECVSSP: SSP OP = 19( NBNR ) -explorer from peer
> 148.6.3.3(2065)
> 02:18:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:18:27: DLSW Received-ctlQ : CLSI Msg : UDATA_STN.Ind dlen: 84
> 02:18:27: %DLSWC-3-RECVSSP: SSP OP = 19( NBNR ) -explorer from peer
> 148.6.3.3(2065)
> R6#
> 02:18:27: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> 02:18:28: DLSW Received-ctlQ : CLSI Msg : UDATA_STN.Ind dlen: 84
> 02:18:28: %DLSWC-3-RECVSSP: SSP OP = 19( NBNR ) -explorer from peer
> 148.6.3.3(2065)
> R6#
> 02:18:28: DISP Sent : CLSI Msg : UDATA_STN.Req dlen: 90
> R6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3