From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Fri Mar 08 2002 - 02:48:50 GMT-3
yes ur right ..... i was also told but i did bother to do a a test on it...
distance only works on intra,inter or external routes.
thanks for a force clearing me !!
-Mamoor
----- Original Message -----
From: Lab Candidate <labccie@yahoo.com>
To: Ahmed Mamoor Amimi <mamoor@ieee.org>; Jaeheon Yoo <kghost@chollian.net>;
ccielab <ccielab@groupstudy.com>
Sent: Friday, March 08, 2002 7:58 AM
Subject: Re: All about "distance" command - compact summary.
> Ahmed, have you done that? if yes, can you show us a real example?
>
> --- Ahmed Mamoor Amimi <mamoor@ieee.org> wrote:
> > it can be done .... :
> > distance 130 1.1.1.1 255.255.255.255 1
> > 1.1.1.1 = router ID
> > access-list 1 = routes who u want to increase the admin distance. U can
add
> > multiple of thses statements.
> >
> > but remember 1.1.1.1 should be router-id of where the routes are coming
in.
> >
> > -Mamoor
> >
> >
> > ----- Original Message -----
> > From: Lab Candidate <labccie@yahoo.com>
> > To: Ahmed Mamoor Amimi <mamoor@ieee.org>; Jaeheon Yoo
<kghost@chollian.net>;
> > ccielab <ccielab@groupstudy.com>
> > Sent: Friday, March 08, 2002 6:20 AM
> > Subject: Re: All about "distance" command - compact summary.
> >
> >
> > > Ahmed, no what I'm asking is to assign different AD's to different
routes
> > coming from the same
> > > router. you just can't do that.
> > >
> > > --- Ahmed Mamoor Amimi <mamoor@ieee.org> wrote:
> > > > it is possible to change the admin distance of particular routes
coming
> > from
> > > > a router by using access list.
> > > > I am sure ur asking under OSPF...... just point to RID and give
> > access-list
> > > > for that u want to raise admin distance.
> > > >
> > > > -Mamoor
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: Lab Candidate <labccie@yahoo.com>
> > > > To: Jaeheon Yoo <kghost@chollian.net>; ccielab
<ccielab@groupstudy.com>
> > > > Sent: Thursday, March 07, 2002 2:25 AM
> > > > Subject: RE: All about "distance" command - compact summary.
> > > >
> > > >
> > > > > Jaeheon,
> > > > > This is nice, but the problem is by doing this you have to change
AD
> > on
> > > > all the routes coming from
> > > > > a single router, how can you change AD on individual routes coming
> > from a
> > > > certain router. I
> > > > > personally don't think it's doable, but would like to know any
> > > > suggestions.
> > > > >
> > > > > ---
> > > > >
> > > > > Hi, all.
> > > > > I've summarized all about "distance" command that I can find out
> > through
> > > > my own lab.
> > > > > I think this summary may be helpful to some of you.
> > > > > Any comments will be welcomed, And please correct me if I'm wrong.
> > > > >
> > > > > Jaeheon,
> > > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:56 GMT-3