From: Andrew Bratchell (a.bratchell@xxxxxxxxx)
Date: Wed Mar 06 2002 - 12:15:25 GMT-3
Chuck,
Sorry, I'm sending you crazy - I should have said 12.1(7) not 12.1(17) -
what I'm a thinking!
I tired, my head is swimming with BGP and I'm fairly sick of studying for my
CCIE.
Andy
-----Original Message-----
From: Church, Chuck [mailto:cchurch@USTA.com]
Sent: 06 March 2002 15:08
To: 'Andrew Bratchell'; Church, Chuck; 'Bob Sinclair';
'ccielab@groupstudy.com'
Subject: RE: Dialer Watch Bounces
Am I going crazy, or isn't the latest 12.1 code 12.1.13, released about 3
weeks ago? Or are you guys running pre-release stuff?
Chuck Church
Sr. Network Engineer
CCIE #8776, MCNE, MCSE
US Tennis Association
70 W. Red Oak Lane
White Plains, NY 10604
914-696-7199
-----Original Message-----
From: Andrew Bratchell [mailto:a.bratchell@caeuk.com]
Sent: Wednesday, March 06, 2002 10:00 AM
To: 'Church, Chuck'; Andrew Bratchell; 'Bob Sinclair';
'ccielab@groupstudy.com'
Subject: RE: Dialer Watch Bounces
Chuck,Bob
No, I meant 12.1(17). I had a similar problem as you Bob using 12.1(15)
Enterprise. Cisco say that you should use this version of code or above.
Andy
-----Original Message-----
From: Church, Chuck [mailto:cchurch@USTA.com]
Sent: 06 March 2002 14:56
To: 'Andrew Bratchell'; 'Bob Sinclair'; 'ccielab@groupstudy.com'
Subject: RE: Dialer Watch Bounces
So it's still real buggy? Or did you mean 12.0.17?
Chuck Church
Sr. Network Engineer
CCIE #8776, MCNE, MCSE
US Tennis Association
70 W. Red Oak Lane
White Plains, NY 10604
914-696-7199
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Andrew Bratchell
Sent: Tuesday, March 05, 2002 11:50 AM
To: 'Bob Sinclair'; ccielab@groupstudy.com
Subject: RE: Dialer Watch Bounces
Bob,
The version of code you are running is most likely the issue.
Dialer Watch was extremely very buggy until 12.1(17)
Andy.
-----Original Message-----
From: Bob Sinclair [mailto:bsin@erols.com]
Sent: 05 March 2002 16:34
To: ccielab@groupstudy.com
Subject: Dialer Watch Bounces
BRI Dudes:
My dialer watch seems to work, but it brings the bri down then immediately
back up at the expiration of the idle timer. Any idea how I can stop this?
I am using dialer profiles, so no map statements. Only icmp is interesting,
then only on one side. Seems to me dialer watch should keep the bri up
continuously until the primary link comes back. Tried adding a 5 second
watch-delay, to no avail.
Running 12.1.11.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:55 GMT-3