From: Church, Chuck (cchurch@xxxxxxxx)
Date: Wed Mar 06 2002 - 11:55:34 GMT-3
So it's still real buggy? Or did you mean 12.0.17?
Chuck Church
Sr. Network Engineer
CCIE #8776, MCNE, MCSE
US Tennis Association
70 W. Red Oak Lane
White Plains, NY 10604
914-696-7199
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Andrew Bratchell
Sent: Tuesday, March 05, 2002 11:50 AM
To: 'Bob Sinclair'; ccielab@groupstudy.com
Subject: RE: Dialer Watch Bounces
Bob,
The version of code you are running is most likely the issue.
Dialer Watch was extremely very buggy until 12.1(17)
Andy.
-----Original Message-----
From: Bob Sinclair [mailto:bsin@erols.com]
Sent: 05 March 2002 16:34
To: ccielab@groupstudy.com
Subject: Dialer Watch Bounces
BRI Dudes:
My dialer watch seems to work, but it brings the bri down then immediately
back up at the expiration of the idle timer. Any idea how I can stop this?
I am using dialer profiles, so no map statements. Only icmp is interesting,
then only on one side. Seems to me dialer watch should keep the bri up
continuously until the primary link comes back. Tried adding a 5 second
watch-delay, to no avail.
Running 12.1.11.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:55 GMT-3