From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Wed Mar 06 2002 - 11:12:33 GMT-3
Are they all plugged into the same mau, but in different areas?
Hmmmm
>>> "Gregg Malcolm" <greggm@sbcglobal.net> 03/05/02 08:12PM >>>
Group,
I'm receiving a mismatched OSPF area message between my two token ring
routers. I'm using MD5 auth for area 0 and there is a virtual link involved.
Strange thing is there is a serial int subnet, 150.50.17.0 on the router
generating these messages, but the remote token ring router never complains
about the serial int (nor any other int's)..
deb ip ospf ev :
01:55:38: OSPF: Rcv pkt from 150.50.18.1, TokenRing0, area 0.0.0.2 mismatch
area 0.0.0.3 in the header
Only my token ring interfaces are involved with these messages. None of the
other routers (6) complain at all. Not a big deal as the routes are installed
in the database and show up in the routing table.
The virtual link is operational and I'm not seeing the standard "backbone area
must be virtual link..blah,blah..) messages"
Any ideas ? TIA - Gregg
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:55 GMT-3