From: Patrick (pjm@xxxxxxxxxxxxxxxxx)
Date: Wed Mar 06 2002 - 10:04:14 GMT-3
I think you need Enterprise to get more vty lines.
----- Original Message -----
From: "Mohamed I. Lubbad" <mlubbad@hotmail.com>
To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>; <ccielab@groupstudy.com>
Sent: Wednesday, March 06, 2002 7:37 AM
Subject: Re: more vty
> Normally you have 5 vty line (vty lines 0-4). In case you need more, then
in
> global config mode, do:
> line vty 0 7 (for example)
>
> and you'll get into the line mode for those lines. If you do 'show line'
> afterwards, you'll see that the vty lines got increased. I have no idea
> about the maximum limit of vty lines you could have.
>
>
> Mohamed I. Lubbad
>
> ----- Original Message -----
> From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, March 06, 2002 13:23
> Subject: more vty
>
>
> > for some reason i need more VTY line on my routers... so more can telnet
> the
> > routers.
> > dont care about the process that is develop.
> >
> > is there any command regarding to increase VTY more then 4
> >
> > -Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:54 GMT-3