From: KIP (knowledge_is_power@xxxxxxxxxxxxxxx)
Date: Tue Mar 05 2002 - 18:34:58 GMT-3
Brian,
This probably means the boot loader is misconfigured.....
check the boot options...
this can be done from rommon....cannot remember exact commands.....
or just try and boot manually from rommon..........using the boot
option.........and then correct your mistake..........it basically means a
configured boot system command failed........
KIP
----- Original Message -----
From: "Diehm, Brian" <Brian.Diehm@COMPAQ.com>
To: "Ccielab (E-mail)" <ccielab@groupstudy.com>
Sent: Thursday, February 21, 2002 4:07 PM
Subject: 6500 boot error
> I keep getting this boot error when I boot the MSFC card on my sup. It
gives me this error and then comes up in boot mode. Any idea what it is? I
am thinking maybe I have a bad image.
>
>
> Self decompressing the image :
############################################################################
####
> ##################################################### [OK]
>
> Currently running ROMMON from S (Gold) region
> %SYS-6-READ_BOOTFILE_FAIL: bootflash: File read failed -- Permission
denied.
>
> %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
>
> %Error reading (Permission denied)
> %Error reading (Permission denied)boot of "cisco2-Cat6k-MSFC2" using boot
helper "bootflash:c6msfc2-boot-mz.12
> 1-7.E.bin" failed
> error returned: File read failed -- Permission denied
> loadprog: error - on file open
> boot: cannot load "cisco2-Cat6k-MSFC2"
>
> System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
> Copyright (c) 2000 by cisco Systems, Inc.
> Cat6k-MSFC2 platform with 524288 Kbytes of main memory
>
>
> Self decompressing the image :
############################################################################
####
> ##################################################### [OK]
>
> Brian Diehm, CCIE#8332
> Global Data Communications Engineering
> 281-518-8205
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3