From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Tue Mar 05 2002 - 17:46:21 GMT-3
This relates to the frame relay traffic shaping question from yesterday.
When priority or custom queueing is configured, are packets generated by the
local router also subject to this queueing? I have the config below, I know
most of the map class makes no sense but I just wanted to test the queueing.
I have debug priority on, but when I ping from the router it is configured
on I don't see the IP packets going into the high queue. Am I doing
something wrong here?
interface Serial0
ip address 10.1.11.3 255.255.255.0
encapsulation frame-relay
ip ospf network broadcast
ipx network 1401
no fair-queue
frame-relay traffic-shaping
frame-relay class tor5
frame-relay map ipx 1401.0010.7b36.e1dd 201 broadcast
frame-relay map ip 10.1.11.1 201 broadcast
frame-relay map ip 10.1.11.14 201 broadcast
!
map-class frame-relay tor5
frame-relay cir 1500000
frame-relay bc 64000
frame-relay be in 56000
frame-relay be out 1500000
frame-relay mincir 256000
frame-relay adaptive-shaping becn
frame-relay priority-group 1
!
priority-list 1 protocol ip high
r3#sh debug
General network interfaces:
Priority output queueing debugging is on
r3#ping 10.1.11.14
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.11.14, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 32/36/44 ms
r3#term mon
% Console already monitors
r3#
Guy H. Lupi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3