From: Tshon (tshon@xxxxxxxxxxx)
Date: Tue Mar 05 2002 - 16:36:47 GMT-3
Where on R2 do you have rip being redistributed..... under OSPF you have
not identified Rip!
redistribute rip subnets
like John said!
Christian C. Aguillo wrote:
>Also check for the second "network" command in the Router2 OSPF Domain. I
>don't see any reson why it should be there.
>
>
>Cheers....
>
>----- Original Message -----
>From: "John Mistichelli" <jmistichelli@yahoo.com>
>To: "Jeongwoo Park" <Jpark@wams.com>; <ccielab@groupstudy.com>
>Sent: Tuesday, March 05, 2002 2:29 PM
>Subject: RE: Rip not getting redis to ospf (tired, but worth it)
>
>
>>You are tired. Try adding "redistribute rip subnets" under OSPF on R2.
>>
>THEN
>
>>you will have mutual redistribution. Cheers.
>>
>>John
>>7536
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>>Jeongwoo Park
>>Sent: Tuesday, March 05, 2002 1:09 AM
>>To: 'ccielab@groupstudy.com'
>>Cc: 'smann0762@hotmail.com'
>>Subject: Rip not getting redis to ospf (tired, but worth it)
>>
>>
>>Hi all
>>I know you are fed up with rip ospf redistribution by now.
>>But I am not getting it to work.
>>
>>Here is the set up.
>>R1------R2-------R3
>>R2 cant reach R1's loop interfaces.
>>
>>R1: runing rip
>>R2: mutual redis
>>R3: ospf
>>Here is the config
>>
>>R1
>>R1#wr t
>>Building configuration...
>>
>>Current configuration : 674 bytes
>>!
>>version 12.2
>>service timestamps debug uptime
>>service timestamps log uptime
>>no service password-encryption
>>!
>>hostname R1
>>!
>>!
>>ip subnet-zero
>>!
>>!
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 172.16.6.1 255.255.255.0
>>!
>>interface Loopback1
>> ip address 172.16.7.1 255.255.255.0
>>!
>>interface Ethernet0/0
>> no ip address
>> no keepalive
>> half-duplex
>>!
>>interface Serial0/0
>> ip address 172.16.4.2 255.255.255.0
>>!
>>interface Ethernet0/1
>> no ip address
>> shutdown
>> half-duplex
>>!
>>router rip
>> network 172.16.0.0
>>!
>>ip classless
>>ip http server
>>!
>>alias exec r sh ip route
>>!
>>line con 0
>>line aux 0
>>line vty 0 4
>> exec-timeout 0 0
>> privilege level 15
>> password xx
>> no login
>>line vty 5 15
>> login
>>!
>>end
>>
>>R2
>>R2#wr t
>>Building configuration...
>>
>>Current configuration : 1067 bytes
>>!
>>version 12.1
>>service timestamps debug uptime
>>service timestamps log uptime
>>no service password-encryption
>>!
>>hostname R2
>>!
>>!
>>!
>>!
>>!
>>!
>>ip subnet-zero
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 172.16.5.1 255.255.255.0
>>!
>>interface Ethernet0
>> no ip address
>> shutdown
>>!
>>interface Serial0
>> ip address 172.16.1.1 255.255.255.252
>> no fair-queue
>> clockrate 500000
>>!
>>interface Serial1
>> ip address 172.16.4.1 255.255.255.0
>> clockrate 500000
>>!
>>interface BRI0
>> no ip address
>> shutdown
>> isdn x25 static-tei 0
>>!
>>router ospf 1
>> log-adjacency-changes
>> summary-address 172.16.1.0 255.255.255.0
>> summary-address 172.16.20.0 255.255.255.0
>> redistribute connected subnets
>> network 172.16.1.0 0.0.0.3 area 0
>> network 172.16.20.0 0.0.0.15 area 0
>>
>>!
>>router rip
>> redistribute ospf 1
>> passive-interface Serial0
>> network 172.16.0.0
>> default-metric 2
>>!
>>ip classless
>>ip http server
>>!
>>alias exec r sh ip route
>>!
>>line con 0
>> exec-timeout 0 0
>> password wams
>>line aux 0
>>line vty 0 2
>> exec-timeout 0 0
>> password xx
>> login
>>line vty 3 4
>> password xx
>> login
>>!
>>end
>>
>>R3
>>R2#telnet 172.16.1.2
>>Trying 172.16.1.2 ... Open
>>
>>
>>User Access Verification
>>
>>Password:
>>Password:
>>R3>en
>>Password:
>>R3#wr t
>>Building configuration...
>>
>>Current configuration : 866 bytes
>>!
>>version 12.2
>>service timestamps debug uptim
>>service timestamps log uptime
>>no service password-encryption
>>!
>>hostname R3
>>!
>>enable password xx
>>!
>>ip subnet-zero
>>!
>>!
>>no ip domain-lookup
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 172.16.20.1 255.255.255.240
>>!
>>interface Loopback1
>> ip address 172.16.20.17 255.255.255.240
>>!
>>interface Ethernet0/0
>> no ip address
>> shutdown
>> half-duplex
>>!
>>interface Serial0/0
>> ip address 172.16.1.2 255.255.255.252
>>!
>>interface Ethernet0/1
>> no ip address
>> shutdown
>> half-duplex
>>!
>>router ospf 1
>> log-adjacency-changes
>> summary-address 172.16.20.0 255.255.255.0
>> redistribute connected subnets
>> network 172.16.1.0 0.0.0.3 area 0
>> network 172.16.20.0 0.0.0.15 area 0
>>
>>!
>>ip classless
>>ip http server
>>!
>>alias exec r sh ip route
>>!
>>line con 0
>>line aux 0
>> transport input all
>>line vty 0 4
>> exec-timeout 0 0
>> password xx
>> login
>>line vty 5 15
>> login
>>!
>>end
>>
>>R1' routing table
>>R1#sh ip rou
>>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
>> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
>> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
>> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
>>default
>>
>>Gateway of last resort is not set
>>
>> 172.16.0.0 is variably subnetted, 6 subnets, 2 masks
>>R 172.16.20.0 255.255.255.0 [120/2] via 172.16.4.1, 00:00:04,
>>
>Serial1
>
>>R 172.16.20.1 255.255.255.255 [120/2] via 172.16.4.1, 00:00:04,
>>Serial1
>>C 172.16.4.0 255.255.255.0 is directly connected, Serial1
>>R 172.16.5.0 255.255.255.0 [120/1] via 172.16.4.1, 00:00:04, Serial1
>>C 172.16.6.0 255.255.255.0 is directly connected, Loopback0
>>C 172.16.7.0 255.255.255.0 is directly connected, Loopback1
>>R1#
>>
>>R2' routing table
>>R2#sh ip rou
>>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
>> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
>> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
>> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
>> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
>>area
>> * - candidate default, U - per-user static route, o - ODR
>> P - periodic downloaded static route
>>
>>Gateway of last resort is not set
>>
>> 172.16.0.0/16 is variably subnetted, 8 subnets, 4 masks
>>O E2 172.16.20.0/24 [110/20] via 172.16.1.2, 00:11:57, Serial0
>>O 172.16.20.1/32 [110/65] via 172.16.1.2, 01:44:48, Serial0
>>O 172.16.4.0/22 is a summary, 00:30:42, Null0
>>C 172.16.4.0/24 is directly connected, Serial1
>>C 172.16.5.0/24 is directly connected, Loopback0
>>R 172.16.6.0/24 [120/1] via 172.16.4.2, 00:00:25, Serial1
>>R 172.16.7.0/24 [120/1] via 172.16.4.2, 00:00:25, Serial1
>>C 172.16.1.0/30 is directly connected, Serial0
>>R2#
>>
>>R3's routing table
>>R3#sh ip rou
>>Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
>> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
>> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
>> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
>> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
>>area
>> * - candidate default, U - per-user static route, o - ODR
>> P - periodic downloaded static route
>>
>>Gateway of last resort is not set
>>
>> 172.16.0.0/16 is variably subnetted, 5 subnets, 4 masks
>>O 172.16.20.0/24 is a summary, 00:12:50, Null0
>>C 172.16.20.0/28 is directly connected, Loopback0
>>O E2 172.16.4.0/22 [110/20] via 172.16.1.1, 00:27:51, Serial0/0
>>C 172.16.20.16/28 is directly connected, Loopback1
>>C 172.16.1.0/30 is directly connected, Serial0/0
>>R3#ping 172.16.7.1
>>
>>Type escape sequence to abort.
>>Sending 5, 100-byte ICMP Echos to 172.16.7.1, timeout is 2 seconds:
>>.....
>>Success rate is 0 percent (0/5)
>>R3#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3