From: Jaroslaw Zak (jaroslawz@xxxxxxxxxxx)
Date: Tue Mar 05 2002 - 14:28:25 GMT-3
Agreed with Alan,
For client you must specify a key towards desired NTP server, for server you
need to define the same key and additionaly put it into "trusted key" group.
ntp authenticate must be enabled at both sides of course.
Cheers
Jarek
>From: alain faure <alainfaure@yahoo.fr>
>Reply-To: alain faure <alainfaure@yahoo.fr>
>To: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>,
>"'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>Subject: Re: NTP Authentication
>Date: Tue, 5 Mar 2002 18:02:32 +0100 (CET)
>
>Hi;
>
>for the client i will do that :
>ntp authentication-key 1 md5 cisco
>ntp authenticate
>ntp server 172.16.1.1 key 1
>
>the two example after will not authenticate, i think
>
>Best regards
>
> --- "Williams, Glenn" <WILLIAMSG@PANASONIC.COM> a icrit : > Hi,
> >
> > When doing NTP authentication going to the server, I have seen for
>example:
> > ntp authentication-key 1 md5 cisco
> > ntp authenticate
> > ntp server 172.16.1.1
> >
> > Now what is correct from below. What is the difference? How to check?
> > Can't seem to nail this down, getting different info.
> >
> >
> > ntp server 172.16.1.1
> > OR
> > ntp server 172.16.1.1 key 1
> > TIA
> > GW
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3