From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Tue Mar 05 2002 - 04:28:13 GMT-3
0.0.0.0 255.255.255.255 means any neigbour..... for specific u need to
define the router-id as Jaeheon
have suggested and then applying the access-list to it.
-Mamoor
----- Original Message -----
From: Chua, Parry <Parry.Chua@compaq.com>
To: Ahmed Mamoor Amimi <mamoor@ieee.org>; Jaeheon Yoo <kghost@chollian.net>;
ccielab <ccielab@groupstudy.com>
Sent: Tuesday, March 05, 2002 11:17 AM
Subject: RE: All about "distance" command - compact summary.
> I belive you can use any (0.0.0.0 255.255.255.255) with acl will do.
>
> Parry Chua
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Tuesday, March 05, 2002 1:48 PM
> To: Jaeheon Yoo; ccielab
> Subject: Re: All about "distance" command - compact summary.
>
>
> Yes ur right .... i never tried this with router-id.
> thanks for the pointer...
> next time i will hit both...... booooom !!
>
> Thanks anyways.
>
> -Mamoor
>
>
> ----- Original Message -----
> From: Jaeheon Yoo <kghost@chollian.net>
> To: ccielab <ccielab@groupstudy.com>; Ahmed Mamoor Amimi <mamoor@ieee.org>
> Sent: Tuesday, March 05, 2002 10:12 AM
> Subject: Re: All about "distance" command - compact summary.
>
>
> > Well, when using distance command on OSPF, you have to use a OSPF
> router-id as a source router ip address. You can check this by "sh ip
> protocol" command.
> >
> > Please look at this.
> >
> > Jaeheon
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3