From: garry baker (fallow46@xxxxxxxxx)
Date: Tue Mar 05 2002 - 01:39:51 GMT-3
Guys,
Been playing with eigrp authentication. i have 3
routers on the same ethernet segment with all exactly
the same key chains etc, all are ntp synced and i am
only able to get the neighbours up between 2 routers.
I think that perhaps there is something strange going
on so i got to 2 routers connected serially, the
configure the same configs on bith routers bu they
don't come up. below is the relevant configs for the
ethernet routers. can anyone see where i have stuffed
them up? r6 & r3 are neighbours, nothing will play
with r1
R1
key chain test
key 1
key-string cisco
accept-lifetime 13:25:00 Mar 5 2002 infinite
send-lifetime 13:25:00 Mar 5 2002 infinite
key 2
key-string lab
interface Ethernet0/0
ip address 165.10.136.1 255.255.255.0
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 test
R3
key chain test
key 1
key-string cisco
accept-lifetime 13:25:00 Mar 5 2002 infinite
send-lifetime 13:25:00 Mar 5 2002 infinite
interface Ethernet0
ip address 165.10.136.3 255.255.255.0
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 test
R6
key chain test
key 1
key-string cisco
accept-lifetime 13:25:00 Mar 5 2002 infinite
send-lifetime 13:25:00 Mar 5 2002 infinite
key 2
key-string lab
interface Ethernet0
ip address 165.10.136.6 255.255.255.0
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 test
Garry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3