From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Mon Mar 04 2002 - 14:29:21 GMT-3
You have to use a map-class for dialer. THen in the map, you tell it
what to do (call back and use authentication)
I am a little fuzzy right now, but I am sure you can find it on the DOC
cd... When I find it I will reply. But I am sure someone will be me to
it :-))
Henry Chen wrote:
>
> Hi,
>
> I have configured two BRIs to do callback, but the client makes the call, and
brings up the line, but it never drops the call and force a callback.
>
> I thought i am doing everything per the DOC.
>
> TIA.
>
> ISDN Simulator: PDS Slimline 2
> IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.1(5)T9, RELEASE SOFTWARE
(fc1)
> r1#sb interface BRI # Callback client
> interface BRI0
> no ip address
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> dialer map ipx 14.0006.0006.0006 name R6 broadcast 2222
> dialer load-threshold 255 either
> dialer-group 1
> ipx network 14
> isdn switch-type basic-net3
> isdn T310 60000
> ppp callback request
> ppp authentication chap
>
>
>
> R6#sb interface BRI
> interface BRI0
> no ip address
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> dialer callback-secure
> dialer map ipx 14.0001.0001.0001 name R1 class dial1 broadcast 1111
> dialer-group 1
> ipx network 14
> isdn switch-type basic-net3
> ppp callback accept
> ppp authentication chap
>
>
> r1#ping ipx 5.5.5.5
> Type escape sequence to abort.
> Sending 5, 100-byte IPX Novell Echoes to 5.0005.0005.0005, timeout is 2 secon
ds:
> .
> 00:17:37: ISDN BR0: TX -> SETUP pd = 8 callref = 0x02
> 00:17:37: Bearer Capability i = 0x8890
> 00:17:37: Channel ID i = 0x83
> 00:17:37: Called Party Number i = 0x80, '2222', Plan:Unknown, Type:Un
known
> 00:17:37: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x82
> 00:17:37: Channel ID i = 0x89
> 00:17:38: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x82
> 00:17:38: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 00:17:38: BR0:1 PPP: Treating connection as a callout
> 00:17:38: ISDN BR0: TX -> CONNECT_ACK pd = 8 callref = 0x02
> 00:17:38: BR0:1 CHAP: O CHALLENGE id 2 len 23 from "r1"
> 00:17:38: BR0:1 CHAP: I CHALLENGE id 2 len 23 from "R6"
> 00:17:38: BR0:1 CHAP: O RESPONSE id 2 len 23 from "r1"
> 00:17:38: BR0:1 CHAP: I SUCCESS id 2 len 4
> 00:17:38: BR0:1 CHAP: I RESPONSE id 2 len 23 from "R6"
> 00:17:38: BR0:1 CHAP: O SUCCESS id 2 len 4!!!!
> Success rate is 80 percent (4/5), round-trip min/avg/max = 44/44/44 ms
> r1#
> 00:17:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed sta
te to up
> 00:17:44: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 2222 R6
>
> ---------------------------------
> Do You Yahoo!?
> Yahoo! Sports - Sign up for Fantasy Baseball
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3