From: Patrick (pjm@xxxxxxxxxxxxxxxxx)
Date: Mon Mar 04 2002 - 00:14:51 GMT-3
Thanks,
I found that on Cisco's site after I posted?
It's kinda lame that this is the only cards not supported. I have four
serial cards in it now so I had one of the tech put in the WIC-2T so I could
add more ports and he could not make it work.
Back to the drawing board on that one. :)
Patrick
----- Original Message -----
From: "Dotun Oni" <dot_oni@hotmail.com>
To: <pjm@roadrunner.nf.net>; <ccielab@groupstudy.com>
Sent: Sunday, March 03, 2002 11:29 PM
Subject: Re: WIC-2T not working
> Patrick,
>
> The problem is not the version of IOS. It has to do with the hardware.
> WIC-2T will not work in a 3640 with a NM-1E2W. It will work the following
> modules:
>
> NM-1FE2W,
> NM-1FE1R2W,
> NM-2FE2W,
> NM-2W
>
> OR
>
> Swap the WIC-2T out for a WIC-1T if you can get by with one serial port.
>
> D
>
> >From: "Patrick" <pjm@roadrunner.nf.net>
> >Reply-To: "Patrick" <pjm@roadrunner.nf.net>
> >To: <ccielab@groupstudy.com>
> >Subject: WIC-2T not working
> >Date: Sun, 3 Mar 2002 22:33:27 -0330
> >
> >Anyone know why a WIC-2T will not work in a 3640 with a NM-1E2W?
> >
> >The software is 12.1(1)T??
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3