From: John Mistichelli (jmistichelli@xxxxxxxxx)
Date: Sun Mar 03 2002 - 10:36:45 GMT-3
Yikes, I hope you mean you can DIAL from RA to RB and not from B to A.
Otherwise you will have to look for filters in your config.
Try: debug isdn q931 and debug dialer
You can watch the call setup. B's number should be listed as "Calling Party"
under q931 when calling from B to A. Thats assuming you are doing a "debug
isdn q931" on A.
Wanna give us your configs?
HTH
John
7536
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of A
Yigit Zorlu
Sent: Friday, March 01, 2002 10:43 AM
To: ccielab@groupstudy.com
Subject: dial brainstorming ..
Hi guys and gals,
Suppose that
two routers have bri interfaces that are connected to ISDN simulator or
provider . I can ping from RA to RB but can not ping from B to A and from
the debug outputs I see that B can not dial the number that I have
configured. I am suspicious about that phone number of B given by the
provider may be incorrect ? How can I see the phone number of B ? In which
debug output ? Is it possible ?
Regards,
Yigit
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3