From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun Feb 24 2002 - 00:49:40 GMT-3
Please have a look at :
http://www.cisco.com/warp/public/793/access_dial/auxback.html
But ur roll over will not do the trick. for this u need a null modem cable.
In this doc. it is written that this is been done with roll-over cable....
yes this right as null-modem cable is also roll-over but with different pin
connections.
RxD 2 3 TXD
TxD 3 2 RxD
CTS 4 5 RTS
RTS 5 4 CTS
DTR 6 20 CD
CD 20 6 DTR
GND 7 7 GND
-Mamoor
----- Original Message -----
From: yakoout <yesmat@iprimus.com.au>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 24, 2002 8:12 AM
Subject: AUX-AUX Back to back no modems
> Hi all,
>
> I am looking for config or pointers on conecting two 2500 routers VIA
> AUX-AUX ports Back to back using rollover cable for ISDN dialup practice,
> without the use of any modems. I am not sure if that is doable or not.
>
> Your help is appreciated
>
> Yakout
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:32 GMT-3