Re: ATM on 3810 with MFT interfaces

From: John Mistichelli (jmistichelli@xxxxxxxxx)
Date: Sat Feb 23 2002 - 13:42:35 GMT-3

• Next message: Nicolai Gersbo Solling: "RE: Redistribution - what cisco expect ?"
• Previous message: Rich: "RE: Uplinkfast issues"
• Maybe in reply to: Jaspreet Bhatia: "ATM on 3810 with MFT interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
 Yes. A simple T1 clossover will work. Here is a sample config for one side.
controller T1 0
 framing esf
 clock source internal
 linecode b8zs
 mode atm
 tdm-group 0 timeslots 1-8
!
!
interface ATM0
 ip address 10.0.0.1 255.0.0.0
 no ip directed-broadcast
 logging event subif-link-status
 !
 pvc 0/50
  protocol ip 10.0.0.2 broadcast
 !
!

Use "clock source line" on the other end...

John #7536

  Jaspreet Bhatia <jasbhati@cisco.com> wrote: Folks,
Is it possible to run ATM on MC 3810 with MFT interfaces
connected to each other back to back and would a T1 crossover cable do the
trick? Thanks

Jaspreet

• Next message: Nicolai Gersbo Solling: "RE: Redistribution - what cisco expect ?"
• Previous message: Rich: "RE: Uplinkfast issues"
• Maybe in reply to: Jaspreet Bhatia: "ATM on 3810 with MFT interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3