From: Richard Wheat (rwheat@xxxxxxxxxx)
Date: Sat Feb 23 2002 - 11:33:26 GMT-3
Hi there Jim and Shadi,
I haven't seen any replies to your question - so, in case nobody has given you
a
better description of this I'll have a go.
NX 97 [45][14/02][09/01] via 300.0000.0000.0001, 697s, Se0/1
This is an external NLSP route (NX) - redistributed from another protocol or
NLSP area. The [45] is the cumulative nlsp metric to network 97, the [14/02] i
s
the tick/hop count to the first area boundary along the route, the [09/01] is
the tick/hop count to the second area boundary or redistributing router.
I have worked this out from testing. If you find an authoritive source I would
appreciate you passing it on.
HTH,
Richard.
Jim Newton wrote:
> In the NLSP external example below there are three sets of brackets, not
> one. What is the significance of the other two sets? There are two of them
> that have what looks like metric/delay info and one that just has one
> number.
>
> Thanks
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Frank
> Jimenez
> Sent: Tuesday, February 19, 2002 3:17 PM
> To: 'Shadi'; 'ccielab'
> Subject: RE: IPX Routing protocols and the Routing Table?
>
> All is found on the web :-)
>
> >From (watch word wrap):
> http://www.cisco.com/univercd/cc/td/doc/product/software/ssr83/rpc_r/554
> 62.htm
>
> Following is sample output:
>
> Codes: R - RIP derived, C - connected, S - static, 2 learned routes
> Maximum allowed path(s) are/is 1
> R Net 1001 [1/1] via 1006.aa00.0400.6508, 94 sec, 0 uses, Ethernet0
> R Net 1003 [1/1] via 1006.aa00.0400.6508, 94 sec, 0 uses, Ethernet0
> C Net 13A is directly connected, 0 uses, Ethernet1 (down)
> C Net 1006A is directly connected, 0 uses, Ethernet0
>
> In the display, the leading character R indicates routes learned via
> RIP, C indicates connected entries, and S indicates statically defined
> entries. The square brackets contain the metric/delay field reports. The
> first number is the metric used to make a routing decision; the second
> number is the delay expressed in IBM clock ticks. The field is not used
> to make routing decisions, however, the Novell server will use this
> field to decide which of two equal metric routes to use, thereby giving
> it a tie-breaking function.
>
> Frank Jimenez, CCIE #5738
> Systems Engineer
> Dallas Commercial
> Cisco Systems, Inc.
> franjime@cisco.com
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Shadi
> Sent: Tuesday, February 19, 2002 12:40 PM
> To: ccielab
> Subject: IPX Routing protocols and the Routing Table?
>
> Hi all,
>
> NX 97 [45][14/02][09/01] via 300.0000.0000.0001, 697s,
> Se0/1
>
> What do we mean by the [45][14/02][09/01] in the above part from the IPX
> routing table?
>
> How IPX prefers the routes? based on distances or metrics or both? I see
> it prefers EIGRP over RIP and NLSP over RIP.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3