From: Steve Schoeneman (steve@xxxxxxxxxxx)
Date: Sat Feb 23 2002 - 00:15:48 GMT-3
Ludwig,
In global configuration mode 'partition flash 1' should change the flash to
1 16M partition.
Steve
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ludwig Morales
Sent: Friday, February 22, 2002 4:34 PM
To: ccielab@groupstudy.com
Subject: Flash memory problems
Pie ChartsHi everybody!
look at this output from my router, i've just upgrade it to 16 MB flash,
what should i do in order to get it to use the 16MB as a whole instead of
listing 8/8
Thanks
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IR-L), Version 11.0(3), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 07-Nov-95 15:16 by deannaw
Image text-base: 0x030239C0, data-base: 0x00001000
cisco 2500 (68030) processor (revision N) with 14332K/2048K bytes of memory.
Processor board ID 06259447
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
1 ISDN Basic Rate interface.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read ONLY)
8192K bytes of processor board System flash partition 2 (Read/Write)
System flash partition 1:
8192K bytes of processor board System flash (Read ONLY)
Chip Bank Code Size Name
1 1 89A0 2048KB INTEL 28F016SA
2 1 89A0 2048KB INTEL 28F016SA
3 1 89A0 2048KB INTEL 28F016SA
4 1 89A0 2048KB INTEL 28F016SA
Executing current image from System flash partition 1
System flash partition 2:
8192K bytes of processor board System flash (Read/Write)
Chip Bank Code Size Name
1 1 01AD 2048KB AMD 29F016
2 1 01AD 2048KB AMD 29F016
3 1 01AD 2048KB AMD 29F016
4 1 01AD 2048KB AMD 29F016
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of Ludwig A. Morales.vcf]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3