RE: about access-list related to bgp protocol

From: Larry Lamb (llamb@xxxxxxxxxxxxxxx)
Date: Fri Feb 22 2002 - 17:14:56 GMT-3

• Next message: IPSec: "Dialer Watch was unstable until Cisco IOS® Sof tware Release 12.1(7) - Diga me !"
• Previous message: Sandro Ciffali: "Re: OSPF virtual links"
• Maybe in reply to: jim martin: "about access-list related to bgp protocol"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Jim,

Since BGP is a TCP connection, you will probably want to add another line to
your access list to either allow established sessions or the other side will
have to initiate the session.

Larry

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of jim
martin
Sent: Friday, February 22, 2002 7:12 AM
To: ccielab@groupstudy.com
Subject: about access-list related to bgp protocol

hi all,

when i apply access-list to serial interface,
my ospf protocol is good.
but bgp protocol connection is failed.
how can i do fix that problem?

thanks .....

------------------------------------------------
in s 0/0
  ip access-group 110 in
  ip addr 10.10.10.1 255.255.255.0

access-list 140 permit ospf any any
access-list 140 permit tcp any any eq bgp

• Next message: IPSec: "Dialer Watch was unstable until Cisco IOS® Sof tware Release 12.1(7) - Diga me !"
• Previous message: Sandro Ciffali: "Re: OSPF virtual links"
• Maybe in reply to: jim martin: "about access-list related to bgp protocol"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3